ZCTEK  INSTRUMENTS
ZC2516/ZC2516A/ZC2516B low resistance tester
产品详情



Brief Introduction

ABUIABACGAAgraO-5gUomJi_2AEw5AI4jQI!300x300.jpg

        ZC2516 series intelligent low resistance tester is specially used to test various resistors, with touch function of 24-bit color 4.3-inch color LCD screen, simple operation, fast test speed, suitable for various resistance design, inspection, quality control and production testing. The machine is equipped with three grade sorting functions. In the sorting state, the resistance value or percentage value can be displayed, and the resistance value can be judged as too large, too small or good quality according to the set value. At the same time, there is a sorting interface on the back panel of the instrument, which enables the interface to start signals and enable the instrument to conduct measurement. The test results are output by the interface on the back panel at the same time. Through this signal interface, the instrument can be connected to the component mechanical processing equipment for automatic testing. In addition, the machine has USB interface and Handler port, the panel function can be completely controlled by the computer, the test results can be sent back to the computer through USB interface or USB interface, or the data can be stored directly on the U disk.

Performance Feature

  • Basic accuracy: ±0.05%±2 words.

  • U Ω resistance minimum resolution: 1.

  • With low resistance test mode, it can effectively protect the tested part.

  • Two display modes: direct reading of resistance value or percentage value.

  • Sorting function: LOW, PASS, HIGH, Handler and signal output.

  • Measuring speed: fast 20 times/s, medium speed 10 times/s, slow speed 2.5 times/s

  • USB interface function.

  • Handler port function.

  • Usb disk interface function.

  • Panel key reset function.


Technical indicators

Model

ZC2516ZC2516AZC2516B

Monitor

24-bit color 4.3-inch color LCD with touch

Number of readings

4 ½digits

Resistance measurement

Measuring range

1uΩ~2MΩ10uΩ~200kΩ1uΩ~20kΩ

Resistance range

CurrentResolution

Accuracy
Rd%+ word

Temperature CoefficientCurrentResolution

Accuracy
Rd%+ word

temperature
coefficient

CurrentResolution

Accuracy
Rd%+ word

temperature
coefficient

20mΩ

1A

1uΩ

0.100+3

100

ppm

no1A1uΩ0.100+3100 ppm

200Ω

1A

10uΩ

0.05+2

50

ppm

1A10uΩ0.05+2

50

ppm

1A10uΩ0.1+2

50

ppm

10mA

100uΩ

10mA100uΩ10mA100uΩ

20Ω

10mA

1mΩ

10mA1mΩ10mA1mΩ

200Ω

1mA

10mΩ

1mA10mΩ1mA10mΩ

2kΩ

100uA

100mΩ

100uA100mΩ100uA100mΩ

20kΩ

200kΩ

10uA

10Ω

10uA10Ωno

2MΩ

1uA

100Ω

0.2+2

nono

Test side configuration

Four-end

Range switching

Automatic / manual

Trigger mode

Internal, manual, external, bus

Low voltage measurement

Open circuit voltage ≤400mV Effective range: 2Ω, 20Ω, 200Ω, 2KΩ

Comparative discrimination

Comparators

  Signal output       HI/IN/LO

  Signal           Tweet mode:OFF, IN, HI/LO

  Limit setting method  Absolute value upper/lower limit, percentage upper and lower limit + nominal value

Sorting

3 files, absolute value / percentage

Interface configuration

USB DEVICE、USB HOST、HANDLER


文件下载
ZC2516,A,B 使用说明书.pdf
704.24KBDownload
ZCTEK INSTR UMENTS

home  l  Products   l   About us   l   Test plan   l   Service    l   News  l   Contact us
______________________________________________________________________________________________
SERVICE